Power Supply - HP ProDesk 480 G2 Maintenance And Service Manual

Power supply

NOTE: System board appearance may vary.
Description
300W, Energy Star 5.0
300W, Active PFC + SEPA
300W, Active PFC
300W, regular
180W, Energy Star 5.0
180W, Active PFC
180W, regular
1. Prepare the computer for disassembly
2. Remove the access panel
3. Disconnect the power cables from the installed drives and the system board connectors:
NOTE:
(1): Primary hard drive
(2): Secondary hard drive
(3): Optical drive
(4): Main system board power connector (labeled 'PWR')
(5): Processor system board power connector (labeled 'PWRCPU')
62 Chapter 5 Removal and replacement procedures: Microtower
(Access panel on page
Installed drives may vary.
(Preparation for disassembly on page
26).
25).