ViewSonic VS11856 Pro8100-1 Service Manual page 63

Verifying the Repair
After repairing projector (Dissembling and assembling projector), Repair center should verify
the quality of repaired unit.
(1) Signal test (Each I/O can function normally)
Connect all connector to the jacks one after the other to check whether each channel can project
normally
I/O port
Test Equipment
Signal format
I/O port
Test Equipment
Signal format
I/O port
Test Equipment
Signal format
I/O port
Test Equipment
Test method
I/O port
Test Equipment
Signal format
ViewSonic Corporation
Monitor In
Standard Pattern generator (Ex. Quantum data)
1920*1080 60Hz
Video
Standard Pattern generator (Ex. Quantum data) or DVD player
NTSC
S-Video
Standard Pattern generator or DVD player
480i
USB
PC and Remote controller
Connect PC (laptop) VGA output to projector.
Set PC (laptop) output signal to projector
Connect projector USB to PC.
Press remote controller page up/down to scroll presentation file up and
down (ex Microsoft office series)
HDMI
Standard Pattern generator or DVD player
1080i/p, 720p,
60
Confidential - Do Not Copy
PRO8100-1