Upgrading Procedure; System Requirements; Installation Procedure - ViewSonic VS11856 Pro8100-1 Service Manual

Jepico F/W update procedure
2.3 Setup Tool/Equipment
Computer
USB Cable
Power Cord

2.4 Upgrading Procedure

Installing Writer SPI-ROM for L0046 Software
Notice
JEPICO Co owns the sole copyright to this software. You may not make a copy of this software. No part of this
document may be produced or transmitted in any form or by any information storage and retrieval system without
written permission from JEPICO Co.

System Requirements

■ Microsoft Windows XP must be installed.
■ Monitor supporting 1024 X 768 or greater resolution with at least 256 colors.
■ 10/100 Mb Ethernet connection for downloading Microsoft .NET Framework 2.0.
■ Parallel port for programming SPI-ROM. If you use ROM programmer tool, not require Parallel Port.

Installation Procedure

<NOTE>:
This software requires Microsoft .NET Framework 2.0 via Internet. Please make sure your PC is connected to the
Internet.
1. Install WriterSpiRomForL0046 software
(1) Double-click setup.exe icon in the Soft directory
ViewSonic Corporation
18
Confidential - Do Not Copy
PRO8100-1