Table of Contents
Advertisement
Radio status
Device status
Status > Device Status
The device status of your Gigaset SX682 WiMAX is displayed in the Device Status sub-
menu.
System uptime
System time
Operating Mode
Device temperature
System Log
ì
If necessary, click the Refresh button to refresh the data in the status display.
Radio status
Status > Radio Status
Information about received and sent data as well as possible data transmission errors is
displayed in the Radio Status submenu.
Connected to a base station
Indicates whether or not your Gigaset SX682 WiMAX is connected to a base station.
Base station ID
ID number of the base station to which the device is connected.
MAC state
Status of the connection setup to the base station. The information shown here is
only intended for technically experienced users. The status of the connection to the
base station is shown under Connected to a base station.
Received power level
Receive level from the WiMAX base station. Values in the range -70 dBm to -10 dBm
are considered optimum. You can ensure this by optimising the antenna direction.
Transmitted power level
Current transmission power.
48
Operating time of your Gigaset SX682 WiMAX since it was last
restarted. The operating time is given in the format
ddd:hh:mm:ss (d=days, h=hours, m=minutes, s=seconds).
Displays the current date and time. This information is trans-
mitted to your Gigaset SX682 WiMAX by the WiMAX network.
Role played by your Gigaset SX682 WiMAX during connection
setup to the Internet (Router or Bridge).
Current device temperature inside your Gigaset SX682 WiMAX.
In the event of overheating, the Gigaset SX682 WiMAX
switches off.
Error protocol in which you will find information about prob-
lems.
Advertisement
Table of Contents
