Gigaset SX682 WiMAX User Manual page 54

Making a phone call or faxing with the Gigaset SX682 WiMAX
Conference calling
You want to make a conference call to two other parties.
Key sequence Action
ì
ì
The call is connected. Subscriber A answers.
ì
Subscriber A is put on hold.
You hear the dialling tone for a second call.
ì
The call is connected. Subscriber B answers.
ì
The conference call between you, subscriber A and subscriber B is
set up.
If you press the R button while the call is being connected to subscriber B, the call setup
is cancelled and you continue with your call to subscriber A.
Ending a conference call
You want to end the call to subscriber B.
Key sequence Action
Press the R button.
The connection to subscriber B is terminated and you continue with
your call to subscriber A.
You want to end the conference call with both parties.
Key sequence Action
Hang up the receiver.
The conference call is terminated.
Subscribers A and B can quit the conference call at any time by hanging up. The connec-
tion to the remaining subscriber continues.
54
Pick up the receiver.
Dial the number for subscriber A.
Press the R button.
Dial the number for subscriber B.
Press the R button.