Advanced Settings - Gigaset SX682 WiMAX User Manual

Advanced Settings

In the Advanced Settings menu, you can configure all the options for the Gigaset
SX682 WiMAX. If required, you can also change the settings you made using the Basic
Setup Wizard. The following table contains the options available in this menu.
Menu
Operating Mode
Internet
Local Network
Telephony
WiMAX configuration
Antenna selection
Administration
All Advanced Settings pages contain Ok and Cancel buttons.
ì
Click Ok to confirm your entries.
ì
Click Cancel to close a page without applying the changes.
Description
Here you can define whether your Gigaset SX682 WiMAX
will be used as a router or a bridge for the Internet access
(page 35).
Here you can configure your Internet access. This menu cov-
ers all setting options for the Internet (page 35).
Here you can configure your local network, e.g. change the
private IP address of the Gigaset SX682 WiMAX or make set-
tings for the DHCP server (page 39).
Here you can configure your access for Internet telephony
(VoIP) (page 40).
Here you can change the access data for your WiMAX access
(page 41).
Here you can choose whether to use the internal antenna or
an outdoor one for your WiMAX access (page 41).
Here you can do various administration tasks, e.g. assign a
system password (page 42) or reset the configuration to the
factory defaults (page 43). You can also load new firmware
(page 44)
Advanced Settings
33