System Requirements; Connecting The Gigaset Sx682 Wimax - Gigaset SX682 WiMAX User Manual

System requirements

Gigaset SX682 WiMAX with outdoor antenna
PC with Gigaset SX682 WiMAX
When used with the integrated antenna or the outdoor antenna, the
i
Gigaset SX682 WiMAX complies with the regulations on limiting the
effect of electromagnetic fields on the general population.
System requirements
To use the Gigaset SX682 WiMAX, the following requirements have to be fulfilled.
u
You will need a PC that meets the following requirements:
– PC with a free LAN interface 10/100BaseT (network adapter). The network
adapter on the configuration PC must support one of the following modes:
10BaseT Full Duplex, 100BaseT Half Duplex, 100BaseT Full Duplex. The TCP/IP
protocol has to be set up on the PC (standard installation for Windows XP and
Windows Vista; if you are using a different Windows operating system, read the
separate instructions on network configuration, if necessary).
– A Web browser is installed on the configuration PC (e.g. Internet Explorer or
Mozilla Firefox).
u
To access the Internet you will need to register your Gigaset SX682 WiMAX with a
WiMAX Internet provider. To use Internet telephony, your provider will need to reg-
ister a VoIP account for your Gigaset SX682 WiMAX.

Connecting the Gigaset SX682 WiMAX

Connect the Gigaset SX682 WiMAX in the following order:
16
WiMAX network base
station