Table of Contents
Advertisement
Local network LAN
Local network LAN
Status > Local Network
The configuration of the local network is displayed in the Local Network submenu.
IP address
Subnet mask
MAC address
DHCP server
ì
If necessary, click the Refresh button to refresh the data in the status display.
Device status
Status > Device Status
The device status of your Gigaset SE680 WiMAX is displayed in the Device Status sub-
menu.
System uptime
System time
Operating Mode
Device temperature
System Log
ì
If necessary, click the Refresh button to refresh the data in the status display.
36
IP address used by the Gigaset SE680 WiMAX in your local net-
work: 192.168.2.1
Subnet mask of your local network: 255.255.255.0
The MAC address uniquely identifies a network component
within a network, in this case the local MAC address of your
Gigaset SE680 WiMAX within your local network.
Displays whether the DHCP server of your Gigaset SE680
WiMAX is activated. As DHCP server, your Gigaset SE680
WiMAX assigns an IP address to all the PCs in the network. If the
DHCP server is activated, you will see the network subscribers
that have received your IP address from the DHCP server in the
DHCP clients field. DHCP must be activated on a PC for the PC
to receive an IP address from the DHCP server. For more infor-
mation see the document "Configuring the local area network"
on the product CD.
Operating time of your Gigaset SE680 WiMAX since it was last
restarted. The operating time is given in the format
ddd:hh:mm:ss (d=days, h=hours, m=minutes, s=seconds).
Displays the current date and time. This information is trans-
mitted to your Gigaset SE680 WiMAX by the WiMAX network.
Role played by your Gigaset SE680 WiMAX during connection
setup to the Internet (Router or Bridge).
Current device temperature inside your Gigaset SE680 WiMAX.
In the event of overheating, the Gigaset SE680 WiMAX
switches off.
Error protocol in which you will find information about prob-
lems.
Advertisement
Table of Contents
