Discreet Ringing Support - Mitel 6800i Series Release Notes

Mitel 6800i Series SIP Phones 4.0.0 SP1 Release Notes

DISCREET RINGING SUPPORT

A new discreet ringing feature has been implemented in Release 4.0.0 SP1. When enabled, if
a call is incoming, the phone will play the configured ring tone once only. All applicable visual
indicators (LED for the corresponding Line key, Message Waiting Indicator [MWI], etc...) will
behave normally.
Note: If a custom ring tone is selected and discreet ringing is enabled, the phone will
not play the custom ring tone during an incoming call. Ring tone 1 will be played once
instead.
Administrators can configure this feature by defining the "discreet ringing" parameter in the
configuration files (i.e. "0", the default, disables this feature, while "1", enables discreet ringing).
Users can configure this feature by programming a key on the phone with the "Discreet Ringing"
type feature using the Mitel Web UI. After the key has been programmed, users can simply
toggle the feature on or off by pressing the programmed "Discreet" key.
Enabling/Disabling Discreet Ringing Using the Configuration Files
Use the following parameter to enable/disable discreet ringing:
PARAMETER
discreet ringing
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
60
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies whether or not the discreet ringing feature should be enabled.
When enabled, during incoming calls, all applicable visual indicators (LED
for the corresponding Line key, Message Waiting Indicator [MWI], etc...) will
behave normally, but the ring tone will be played only once.
Boolean
0 (Disabled)
0 - 1
0 (Disabled)
1 (Enabled)
discreet ringing: 1