Mitel 6800i Series Release Notes page 29

PARAMETER
sip execassist fac
initiate call
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
Filter Softkey
In addition to the new parameters, a "Filter" softkey type has been introduced allowing both
Executives and Assistants the ability to easily activate and deactivate the Executive Call
Filtering feature.
Note: The As-Feature Event Subscription option must also be enabled for the Filter
softkey to function. This feature can be enabled by defining the
"sip lineN as-feature-event subscription" parameter as "1" in the configuration files
(where "N" corresponds to the applicable line) or through the phone's Web UI under
Advanced Settings > LineN > Advanced SIP Settings > As-Feature-Event
Subscription. Refer to the Mitel 6800i Series SIP Phone Administrator Guide for
additional details on the As-Feature Event Subscription feature.
Filter Softkey for the Executive's Phone
The Executive's phone requires that only one Filter softkey be configured. The Filter softkey's
value can either be left undefined (which will toggle the Executive Call Filtering settings on the
call manager via the SIP SUBSCRIPTION/NOTIFY mechanism) or, it can be defined using the
following values (which will toggle the settings via an FAC call):
• Executive Call Filtering Activation FAC (e.g. "#61")
• Used when the Deactivation FAC is in the same format as the Activation FAC but
sequentially one number above the Activation FAC. For example, if the softkey value
is defined as "#61" (the Activation FAC), the phone will automatically assume that the
Deactivation FAC is "#62" and will use that code to deactivate Executive Call Filtering.
• Executive Call Filtering Activation FAC followed by a semi-colon and then Executive Call
Filtering Deactivation FAC (e.g. "#61;*61" or "#61;#71")
• Used when the Activation and Deactivation FACs are not in the same format or when
they are not sequential. For example, if the Activation FAC is configured in the BroadSoft
BroadWorks Web portal is "#61" and the Deactivation FAC is configured as "*61" or
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the Feature Access Code (FAC) for the BroadSoft Executive-
Assistant Initiate Call feature.
String (in quotations)
"#64"
N/A
sip execassist fac initiate call: "#64"
Additional Information
25