BLF/LIST RING SPLASH ENHANCEMENTS
Starting with Release 4.0.0 SP1, BLF and BLF/List ring splash settings have been consolidated
for the 6865i, 6867i, and 6869i SIP phones. Ring splash parameter values that were once only
applicable to BLF-monitored extensions have now been extended to BLF/List-monitored
extensions, therefore making ring splash behavior consistent between both BLF and BLF/List.
Note: BLF and BLF/List ring splashes are not played if a custom ring tone has been
selected.
The following parameters and values now are applicable to both BLF and BLF/List:
PARAMETER
play a ring splash
DESCRIPTION
Enables or disables the playing of a short ring splash when there is an
incoming call on a BLF or BLF/List-monitored extension.
Parameter values are as follows:
0. Disables the feature.
1. Enables the feature when the phone is in an idle state.
2. Enables the feature when the phone is in either an idle or active call
state.
Note: This global parameter is not dynamic. Changes to this parameter
will take effect only after the phone has been rebooted.
Additional Information
13