Making Copies - Canon PC400 Service Manual

CHAPTER 1 GENERAL DESCRIPTION
B. Making Copies
1) Switch the copier ON.
• If necessary, wait until the intensity of the scanning lamp reaches the specified
value.
• The wait time is about 0 second.
• The copier will shut itself off in about 5 minutes if left alone without key operation.
2) Lift the copyboard cover, and place a document face down, along the size index.
• Place the document so that its center is at
then, close the copyboard cover.
3) Adjust the copy density to suit the document.
4) Slide the pick-up guide to suit the size of copy paper.
5) Set copy paper on the pick-up tray.
PC420/430/FC220
Place a stack of copy paper of a size suited to the document on the pick-up tray;
make sure the edges of the sheets are flush.
• The stack may be 5 mm (about 50 sheets of plain paper).
6) Set the copy count.
PC420/430/FC220
Set the number of copies to make (1 to 9 or F) using the + key, and check the Copy
Count indicator.
1-8
COPYRIGHT © 1998 CANON INC.
on the size index (Figure 1-401B);
Document
Figure 1-401B
Figure 1-402B
CANON PC400/420/430,FC200/220 REV.0 JAN.1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Size index