Canon PC400 Service Manual page 132

CHAPTER 8 INSTALLATION
Step
11 Connect the power cord to the power
outlet and the copier, and switch the
copier ON.
12 Set the Test Sheet on the copyboard,
and make copies; make sure that
copies are made properly.
13 Clean the exterior of the copier and the
area around it.
8-4
COPYRIGHT © 1998 CANON INC.
Work
CANON PC400/420/430,FC200/220 REV.0 JAN.1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
• Press the +, Clear/Stop, and other keys to make sure
that the copy count is correctly indicated
(PC420/430/FC220).
• Check that '1' goes ON on the display
(PC420/430/FC220).
• Check that '1' goes ON on the display
(PC420/430/FC220).
• Check the Main indicator goes ON (PC400/FC200).
• Check the movement of the copy density lever/dial.
• Make sure no abnormal noise is heard.
• Make sure that copies are made in the specified
number properly (PC420/430/FC220).
• Check that 'P' is indicated when the Copy Start key is
pressed without setting copy paper
(PC420/430/FC220).
Description