External Covers; Detaching The Control Panel Cover - Canon PC400 Service Manual

CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
A. External Covers
Detach the covers as follows to
clean, inspect, or repair the inside of the
machine.

1. Detaching the Control Panel Cover

1) Move the copyboard cover to the left
until it stops.
2) Open the top cover, and remove the
screw .
3) Detach the control cover
it to the front.
Note:
When attaching the PC400/FC200
control panel cover, fit the VR on
the control panel PCB into the
groove of the density control lever.
7-4
COPYRIGHT © 1998 CANON INC.
as if to lift
CANON PC400/420/430,FC200/220 REV.0 JAN.1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Control panel cover
Bottom cover
Top cover
Body cover
Delivery assembly cover
Copyboard cover
Figure 7-201A
Figure 7-202A