Normal Messages - Kyocera Mita Ecosys FS-1010 Service Manual

Normal messages

Indicator Remote Operation Panel display
Cancelling data
Please wait
Processing
Processing
Waiting
Form Feed Timeout
Ready
Sleeping
Data inside the printer is being
canceled.
The indicators light in sequence from
the top, then go off in sequence from
the bottom. This process is repeated
twice.
When the printer is switched on for
the first time after the toner container
is installed, (Adding toner) also
appears.
The printer is warming up and is not
ready to print. The indicators light in
sequence twice from top to bottom.
When the printer is switched on for
the first time after the toner container
is installed, (Adding toner) also
appears.
The printer is receiving data.
The printer is processing data.
The printer is waiting for the end-of-
job command before printing the last
page. Pressing the Cancel key allows
you to obtain the last page
immediately.
The printer is printing the last page
after a waiting period.
The printer is ready to print.
The printer is offline. The printer
stores but does not print received data.
The printer is in sleep mode. The
indicator flashes at 5-second intervals
and all other indicators go off. The
printer wakes from Sleep mode
whenever a key on the operator panel
is pressed, the cover is opened or
closed, or data is received. The printer
then warms up and goes online. (You
can set the amount of time before the
printer enters sleep mode from the
Remote Operation Panel utility.)
6-5
Description
FS-1010