10
TUNING THE CHASSIS
10.2
Adjusting the shift lever
Info
The adjustment range of the shift lever is limited.
–
Loosen nuts
–
Adjust the shift lever by turning shift rod
Guideline
Shift rod adjustment range
Info
Make the same adjustments on both sides.
At least five screw threads must be screwed into the seating.
–
Check adjusting angle
Guideline
Adjusting angle
shift lever
–
Tighten nuts
Info
After the nuts have been tightened, the bearings of the shift rod must be central
and aligned identically to each other in order to ensure freedom of movement in
the bearing shells.
101927-10
–
Check the shift lever to ensure it is functioning properly and can move freely.
1
.
A
B
.
B
shift rod - linkage -
1
.
2
.
110... 122 mm (4.33... 4.8 in)
75°
74