KTM 390 Duke 2015 COL Owner's Manual page 147

17 SERVICE WORK ON THE ENGINE
–
Remove screws
–
Pull oil filter
Circlip pliers reverse (51012011000)
–
Completely drain the engine oil.
–
Thoroughly clean the parts and sealing area.
101918-10
–
Insert oil filter
–
Oil the O-ring of the oil filter cover. Mount oil filter cover
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover
Info
Too little engine oil or poor-quality engine oil results in premature wear to the
101919-10
engine.
5 . Remove the oil filter cover
7
out of the oil filter housing.
7
.
6 with the O-ring.
6
.
M5 8 Nm (5.9 lbf ft)
145