Wheels, Tires; Removing The Front Wheel - KTM 390 Duke 2015 COL Owner's Manual

13

WHEELS, TIRES

13.1

Removing the front wheel

x
Preparatory work
–
Raise the motorcycle with the rear wheel stand. (
–
Raise the motorcycle with the front wheel stand. (
Main work
–
Remove screws
–
Remove screw
–
Loosen screws
–
Unscrew screw
spindle out of the axle clamp. Remove screw
Warning
Danger of accidents Reduced braking effect caused by damaged brake discs.
–
–
Holding the front wheel, withdraw the wheel spindle. Take the front wheel out of the
fork.
Info
Do not pull the hand brake lever when the front wheel is removed.
B01391-10
1
and push the fender to the side.
2 and pull wheel speed sensor
4 5
and screw .
5
about six turns and press your hand on the screw to push the wheel
Always lay the wheel down in such a way that the brake discs are not dam-
aged.
p. 75)
p. 76)
3 out of the hole.
5
.
103