Panasonic WV-SW396 Installation Manual page 35

About the live indicator
The live indicator will light or blink as follows depending on the camera status.
Operation status
When the power is turned on
During the standby or connection (Cable is not connected.)
During the standby or connection (Cable is connected.)
During the upgrade process
During the initialization
Port forwarding error caused by the UPnP function
Trouble happening on the camera
Failure in writing data on the SDHC/SD memory card
Before the network
connection is established
When the network
connection is established
Indicator status
Blinks orange
Blinks orange → Blinks green → Lights green
Lights orange
Lights green
Blinks orange
Blinks orange → Lights off
Blinks orange (in 2 seconds intervals (on for 1 second /
off for 1 second))
Blinks red
Lights red
35