Assembly
Figure 3
Step 1
Connect the Console Harness
coming from Left Upright to Cable
Harness coming from Motor Cover.
Step 2
Attach Left Upright and Right
Upright to Base using Allen Bolts
M8x15 (Qty. 8) and Washer 9x22x2
mm (Qty. 8). Do not tighten bolts.
Figure 4
Step 1
Attach Console to Left and Right
Uprights using Washers (Qty 4) and
Allen Bolts (Qty 4).
Figure 3
Left Upright
Left Fender
Figure 4
Console
Left Upright
7
Right Upright
Right Fender
Washer 9*22*2
Allen Bolt
M8*15
Washer 9*22*2
Allen Bolt M8*15
Right Upright