Brother MFC-9320CW Service Manual page 563

WSW61 (Scanning light intensity to judge to be stable 1)
■
Selector No.
1 Change rate of the CCD scanning
l light intensity to judge to be stable in
4 the long time mode (Not used.)
5 Change rate of the CCD scanning
l light intensity to judge to be stable in
8 the short time mode (Not used.)
■ WSW62 (Scanning light intensity to judge to be stable 2)
Selector No.
1 Change rate of the CCD light
l intensity for scanning pages
4 compensation (Not used.)
5 Selection of judging function for
simple scanning pages
6 compensation
7 Selection of judging function for
regular scanning pages
8 compensation
- Selectors 5 through 8: Selection of judging function for scanning pages compensation
These selectors set the condition to control scanning pages compensation. Some operation losses
occur in the control of the compensation. If you want to start scanning immediately even if the
image quality is not good, set to "01: Not discriminates". If you want to give priority to the image
quality even though losses are increased, select one of others ("00: Discriminates depending on the
rate of change" or "10: Discriminates every page").
Function
Function
App.1-49
Setting and Specifications
Setting and Specifications
No. 5 6
0 0: Judges according to the
change rate
0 1: Not judges
1 0: Judges every page
No. 7 8
0 0: Judges according to the
change rate
0 1: Not judges
1 0: Judges every page
Confidential