8.37 USB Direct Interface Relay PCB ASSY
(USB direct interface model only)
(1) Remove the two Taptite bind B M3x8 screws and FG harness.
(2) Remove the USB direct interface relay PCB ASSY from the Front cover top ASSY.
(3) Disconnect the Connector of the USB A-MAIN relay harness ASSY from the USB direct
interface relay PCB ASSY.
Harness routing: Refer to
USB direct interface relay PCB ASSY
Front cover top ASSY
Fig. 5-94
USB direct interface relay PCB ASSY
USB A-MAIN relay harness ASSY
Fig. 5-95
"
Front Cover Top ASSY (USB Direct Interface Relay PCB
ASSY)."
5-94
FG harness
Taptite bind B M3x8
Confidential