Brother MFC-9320CW Service Manual page 395

(5) Turn the Main body upside down.
(6) Remove the two Taptite bind B M4x12 screws to remove the Under bar from the Main body.
Under bar
Main body
<Bottom of main body>
(7) Disconnect the Connector (CN2) of the Heater 120V harness ASSY from the Low-voltage
power supply PCB ASSY.
Low-voltage power supply
PCB ASSY
Taptite bind B M4x12
Fig. 5-237
CN2
Fig. 5-238
5-180
Heater 120V harness ASSY
<Right side>
Confidential