Brother MFC-9320CW Service Manual page 200

(12) Remove the two Taptite pan B M4x14 screws, and then remove the Fuser unit from the
Main body while holding the "A."
Main body
Taptite pan B M4x14
"A"
Pressure roller ASSY
Fuser unit
Taptite pan B M4x14
<Back side>
Fig. 4-11
Note:
- Do not apply a physical impact or vibration to the Fuser unit.
- Do not touch the roller and electrodes as shown in the figure below to prevent
breakage of the Fuser unit.
Fuser unit
Fuser unit
Fig. 4-12
4-10
Confidential