Network Storage - TRENDnet TV-IP321PI User Manual

TRENDnet User's Guide

Network Storage

Network Storage
Network Storage must be setup before it can be managed. For storage
management, please refer to the next section.
The TV-IP321PI supports two formats of network storage file systems:
NFS and CIFS. NFS, Network File System, is natively supported by Linux
computers and most NAS, Network Attached Storage. CIFS, Common
Internet File System, is natively supported by Windows® systems and
now is generally supported by Linux. (OS X® file sharing is not standard
SMB and not compatible as a network storage disk here.)
You can add up to 8 network storages for your camera. The recordings
will subsequently be stored in these spaces. Save video from the first
storage and then the next when the first one is full. Click on the entry to
change the settings and click Save to save the settings.
© Copyright 2015 TRENDnet. All Rights Reserved.
No: The sequential number of the network storage.
Type: The type of storage.
Server
Enter the IP address of your network storage.
Address:
File Path: Enter the shared folder as file path for network storage.
You can create a folder under the shared folder and make
it a network volume here. Just create the folder and enter
the correct path name here.
Capacity: Enter the size of the disk space you want to assign for
this storage. The minimum disk space requirement is
8GB. If you do not want to limit the size and use the full
physical disk space, put number 0 in this field.
File
Choose between NFS or CIFS for file system. If you assign
System:
the network storage on a Windows® computer, set it to
CIFS.
User
Enter the user name if the network storage requires user
Name:
name and password. Enter any non-blank letters if no
authentication is required.
Password: Enter the password to access the network storage. Enter
any non-blank letters if no authentication is required.
Click Save to save the changes. The camera may reboot to make the
network storage available. Go to the next section to format and manage
your network storage.
Tip: To create a network storage on your
Windows® based system, create a shared folder
and then test your set up with another computer.
Enter the IP address of the computer here and
enter the shared folder name with a leading
forward slash. For example, if you have a shared
folder named "SMB", enter "/SMB" in the File
Path.
TV-IP321PI
54