Table of Contents
Advertisement
TRENDnet User's Guide
8. Enter a new password. The default password is admin. You are
required to change the password from the default setting to prevent
unauthorized access. Enter the default password: admin and enter
the new passwords for a brand new installation. The password must
be between 8 and 16 characters. (Alphanumeric: a-z, A-Z, 0-9, !, @, #,
$)
Note: This camera installation wizard is also good for finding the camera if it
was setup with DHCP. The IP address may change dynamically with the DHCP
setting. If you want to access your camera again and you don't know the IP
address, you can run this camera installation wizard again. If you have
already setup the password and want to keep the password unchanged, un-
check the Change Password box and click next to get the link to access your
camera.)
© Copyright 2015 TRENDnet. All Rights Reserved.
9. The setup wizard is verifying your installation. Enter the user name
admin and the password you've just set and then click OK.
TV-IP321PI
12
Hide quick links:
Advertisement
Table of Contents
