TRENDnet TV-IP321PI User Manual page 43

TRENDnet User's Guide
Light sensitivities
Smart IR: Smart IR can adjust the strength of infrared lights
at night depending on the distance of an object to
maintain the maximum IR light distance and while
maintaining a clear picture when object is close by.
Default: On.
Max. Exposure
Adjust this value for exposure time for
Time:
each picture. You can choose a value
between 1/3 second to 1/100,000
second. The default value is 1/30
second exposure time for each picture.
Video
This is the base frequency for the video refresh
Standard:
rate. It is recommended to set to the same
frequency of your local video standard (NTSC: 60,
PAL: 50). Default: 60Hz.
Day/Night
Switch:
schedule.
Auto:
Sensitivity: The light sensor sensitivity.
Switch Time: The time delayed to switch between
modes. Longer switch time can prevent
unnecessary mode flipping if an object is blocking
the light source temporarily. Range: 5-120 seconds,
default: 5 seconds.
© Copyright 2015 TRENDnet. All Rights Reserved.
Choose whether you want the
camera to be set to the day mode
(color video) or night mode (IR
enhanced black/white video).
You can manually set it to day
mode or night mode, adjust by
lighting (Auto), or pre-define
Schedule:
Use quick selection or enter the time down below.
Click OK to confirm the time you want to set.
Start Time: The start time for day mode.
Stop Time: The start time for day mode.
Position adjustments
Mirror:
Choose horizontal, vertical or both to adapt to the
physical position of installation.
TV-IP321PI
43