Campbell Hausfeld CT1001 Operating Instructions Manual

Operating Instructions

Oilless Compressor
Table of Contents
Introduction � � � � � � � � � � � � � � � � � � � � � � � � � 1
Unpacking� � � � � � � � � � � � � � � � � � � � � � � � � � � 1
Safety Guidelines � � � � � � � � � � � � � � � � � � � � � 2
Safety Symbols � � � � � � � � � � � � � � � � � � � � � � � 2
Important Safety Information � � � � � � � � � 2
Installation � � � � � � � � � � � � � � � � � � � � � � � � � � 3
Glossary / Getting To Know Your
Compressor� � � � � � � � � � � � � � � � � � � � � � � � � � 4
Operation � � � � � � � � � � � � � � � � � � � � � � � � � � � �5
Maintenance� � � � � � � � � � � � � � � � � � � � � � � � � �5
Troubleshooting Guide � � � � � � � � � � � � � � � �7
Limited Warranty� � � � � � � � � � � � � � � � � � � � � �8
Introduction
Oilless compressors are designed for a
variety of home tasks� These compressors
can power smaller pneumatic tools, but
work ideally for brad nailers, finishing
nailers and staplers� This compressor
operates without oil.
Unpacking
When unpacking unit, inspect carefully
for any damage that may have occurred
during transit� Make sure any loose fittings,
bolts, etc�, are tightened before putting unit
into service� In case of questions, damaged
or missing parts, please call 1-800-543-6400
for customer assistance� Have the serial
number, model number, and parts list
(with missing parts circled) before calling�
DO NOT RETURN THE
STOP!
PRODUCT TO THE
RETAILER!
Do not operate
unit if damaged
during shipping, handling or use.
Damage may result in bursting and
cause injury or property damage.
© 2012 Campbell Hausfeld/Scott Fetzer
This compressor / pump is not equipped and should not be used "as is" to supply
breathing quality air. For any application of air for human consumption, the air
compressor / pump will need to be fitted with suitable in-line safety and alarm
equipment. This additional equipment is necessary to properly filter and purify
the air to meet minimal specifications for Grade D breathing as described in
Compressed Gas Association Commodity Specification G 7.1 - 1966, OSHA 29 CFR
1910. 134, and / or Canadian Standards Associations (CSA).
DISCLAIMER OF WARRANTIES
In the event the compressor is used for the purpose of breathing air application
and proper in-line safety and alarm equipment is not simultaneously used,
existing warranties shall be voided, and the Campbell Hausfeld disclaims any
liability whatsoever for any loss, personal injury or damage.
RETAIN THIS INFORMATION FOR FUTURE REFERENCE
Serial Number:
Model Number:
Date of Purchase:
For parts, product & service information
visit www.chpower.com
Breathable Air Warning
CT1001
IN637600AV 1/12