Campbell Hausfeld CS2152 Operating Instructions Manual

Campbell Hausfeld CS2152 Operating Instructions Manual

Series cs rotary screw
Table of Contents

Advertisement

Available languages

Available languages

Operating Instructions
Rotary Screw
Air Compressors

Table of Contents

Safety Guidelines . . . . . . . . . . . . . . . . . . . . . 2
Safety Symbols . . . . . . . . . . . . . . . . . . . . . . . 2
Important Safety Information . . . . . . . . . 2
Specifications . . . . . . . . . . . . . . . . . . . . . . . . 2
Unpacking. . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . 9
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . 14
Troubleshooting Guide . . . . . . . . . . . . . . 18
Limited Warranty. . . . . . . . . . . . . . . . . . . . 20
© 2012 Campbell Hausfeld/Scott Fetzer
Quick Reference
OIL
Single viscosity ISO100 rotary screw compressor oil
(Part number GS903800AV - 1 Gallon Container).
Available from Campbell Hausfeld, please call 1-855-504-5678 for customer
assistance.
OIL CAPACITY
2.1 gallons
RETAIN THIS INFORMATION FOR FUTURE REFERENCE
Serial Number:
Model Number:
Date of Purchase:
For parts, product & service information
visit www.campbellhausfeld.com
1-855-504-5678
Series CS Rotary Screw Compressors
IN564600AV 10/12

Advertisement

Chapters

Table of Contents
loading

Summary of Contents for Campbell Hausfeld CS2152

  • Page 1: Table Of Contents

    Important Safety Information ..2 Available from Campbell Hausfeld, please call 1-855-504-5678 for customer Specifications ......2 assistance.
  • Page 2: Safety Guidelines

    Campbell Hausfeld disclaims any precautions. liability whatsoever for any loss, personal injury or damage.
  • Page 3 Series CS Rotary Screw Compressors Important Safety Information (Continued) have suffi cient fl ow and pressure ratings to protect the pressurized GENERAL SAFETY components from bursting. The fl ow rating can be found in the parts ◆ Read all manuals included with this product manual.
  • Page 4: Getting To Know Your Compressor

    Operating Instructions Getting To Know Your Compressor Air End Safety Valve Oil Cooler Assembly Air / Oil Separator Air End Control Box Motor Filter Tank Drain Drain Tank Safety Valve Tank Pressure Gauge Figure 1 - Components of the compressor www.campbellhausfeld.com...
  • Page 5 Series CS Rotary Screw Compressors Getting To Know Your Compressor Air / Oil Separator Beltguard ASME Label Oil Filter Figure 2 - Components of the compressor www.campbellhausfeld.com...
  • Page 6 Operating Instructions Getting To Know Your Compressor Air Intake / Filter Assembly Electric Control Unit Oil Circulation Connection / Outlet Oil Fill Opening and Cap Oil Circulation Compressed Connection / Inlet Air Outlet Oil Drain Screw Oil Filter Safety Valve Air / Oil Separating Rotation Direction Element...
  • Page 7: Unpacking

    Series CS Rotary Screw Compressors Unpacking Do not lift or move unit without appropriately rated equipment. Be sure the unit is securely attached to lifting device used. Do not lift unit by holding onto tubes or coolers. Do not use unit to lift other attached equipment. After unpacking the unit, inspect carefully for any damage that may have occurred during transit.
  • Page 8 Operating Instructions Installation (Continued) PIPING Never use plastic (PVC) pipe for compressed air. MINIMUM PIPE SIZE FOR COMPRESSED AIR LINE Serious injury or death could result. Length Of Piping System Any tube, pipe or hose connected to the unit must be able to 25 feet 50 feet 100 feet...
  • Page 9: Wiring Diagram

    Series CS Rotary Screw Compressors Wiring Diagram TO SUPPLY MOTOR COMP MOTOR LEGEND CONTROL TRANSFORMER COIL OVERLOAD FAN OVERLOAD HATR HIGH AIR TEMPERATURE RELAY HIGH PRESSURE RELAY TIMER RELAY SWITCH, TANK PRESSURE CONTACTOR-MAIN SWITCH, HIGH PRESSURE POWER ON HOUR OFF ON HATR 1 HPR 1 METER...
  • Page 10 Operating Instructions Installation (Continued) GROUNDING DIRECTION OF ROTATION Improperly grounded electrical NOTE: Improper rotation will result in failure or compressor. components are shock hazards. The direction of rotation must be counterclockwise (as shown Make sure all the components are properly grounded to by the arrow on the air end in Figure 6) while facing the flywheel prevent death or serious injury.
  • Page 11 Recommended Oil Single viscosity ISO100 rotary screw compressor oil (Part Maximum number GS903800AV - 1 Gallon Container). Available from (cold oil level) Campbell Hausfeld, please call 1-855-504-5678 for customer assistance. Oil Capacity Minimum (cold oil level) 2.1 gallons...
  • Page 12 Operating Instructions Operating Instructions Installation (Continued) OIL LEVEL CHECK (See Figure 7) • Check oil level by removing oil plug. Prime Port Prime Port • With hot oil, the level will be higher than with cold oil. Pulley Pulley As a result, oil may escape when the oil plug is opened at the maximum oil level.
  • Page 13: Operation

    Operation 4. Allow compressor to run for approximately 5 minutes. Turn INITIAL OPERATION CHECK off using the ON / OFF switch. Allow compressor to sit for at IMPORTANT: Check motor rotation before operating the least 1 minute while the high pressure air is released through compressor.
  • Page 14: Maintenance

    Operating Instructions Operation (Continued) Failure to install appropriate water / oil GUARDING removal equipment may result in damage to The belt guard provided must be machinery or workpiece. installed on the unit. AMBIENT OPERATING TEMPERATURE Never operate compressor without a beltguard. This unit can start The compressor is designed to operate in an ambient automatically without warning.
  • Page 15 Series CS Rotary Screw Compressors Maintenance (Continued) 3. Remove the oil filter cartridge with a suitable tool, e.g. oil OIL CHANGE filter strap wrench. RISK OF INJURY! The unit consists of rotating and pressurized components. Do not attempt Dispose of the old oil fi lter cartridge in to change oil until the unit has completely stopped and been fully accordance with the applicable regulations.
  • Page 16 Operating Instructions Maintenance (Continued) 3. Oil the seal on the new air-oil separating element with AIR INTAKE FILTER oil of the same oil type as in the compact module screw Do not remove air fi lter housing or perform any compressor.
  • Page 17 Series CS Rotary Screw Compressors Maintenance (Continued) COMPONENTS Turn off all power and clean the air end, motor, fan blades, air lines, oil cooler and tank on a monthly basis. BELTS Lock out and tag the power then release all pressure from the tank to prevent unexpected movement of the unit. Check belt tension every 3 months.
  • Page 18: Troubleshooting Guide

    Operating Instructions Troubleshooting Guide SYMPTOM CAUSE SOLUTION Unit fails to start - Motor Insufficient power to Source electric to the compressor is either the incorrect voltage, makes no noise compressor insufficient wire size to carry the load, the fuse box or breaker box is not sufficient to carry the load requirements to the compressor.
  • Page 19 Series CS Rotary Screw Compressors Service Record DATE MAINTENANCE PERFORMED REPLACEMENT COMPONENTS REQUIRED www.campbellhausfeld.com...
  • Page 20: Limited Warranty

    B. Maintenance/Service Parts and Fluids – The CS Series compressor must be maintained and serviced in accordance with the operating manual. Genuine Campbell Hausfeld fluids and parts must be used or the Extended Warranty will be void. Proof of purchase of genuine service parts and fluids must be maintained for the duration of the extended warranty period.
  • Page 21 Importantes Instrucciones GS903AV - Contenedor de 1 galón). Disponible en Campbell Hausfeld, por favor de Seguridad ......S2 contacte a su distribuidor local Campbell Hausfeld.
  • Page 22: Medidas De Seguridad

    Campbell Hausfeld no asumirá NINGUNA responsabilidad por pérdidas, heridas precauciones de seguridad. personales o daños.
  • Page 23 Compresores de Tornillo Rotativo Serie CS Importantes Instrucciones de Seguridad ( Continuación) INFORMACIONES GENERALES DE SEGURIDAD a la Presión Máxima Admisible de Trabajo (MAWP) del tanque. Esta válvula debe estar diseñada para los valores máximos de fl ujo y ◆ Lea con cuidado todos los manuales incluídos con presión para proteger los componentes contra el peligro de explosión.
  • Page 24: Conozca Su Compresor

    Manual de Instrucciones Conozca su Compresor Válvula de seguridad en la unidad de compresión Conjunto enfriador del aire Separador de aire/aceite Unidad de compresión Caja de control Motor Filtro de aceite Purga del Drenaje del tanque aceite Válvula de seguridad Manómetro del tanque del tanque...
  • Page 25 Compresores de Tornillo Rotativo Serie CS Conozca su Compresor Separador de aire/aceitea Tapa de la correa Etiqueta ASME Filtro de aceite Figura 2 - Componentes del compresor...
  • Page 26 Manual de Instrucciones Conozca su Compresor Conjunto de entrada de aire y filtro Unidad de control eléctrico Conexión/salida de circulación de aceite Tapón y apertura para el llenado de aceite Conexión/entrada de la Salida de aire circulación de aceite comprimido Tapón roscado para drenaje del aceite Filtro de aceite...
  • Page 27: Desempaque

    Compresores de Tornillo Rotativo Serie CS Desempaque Nunca alce o mueva la unidad sin usar un equipo adecuado. Cerciórese de que la unidad esté bien segura. No la tome por los tubos o piezas del sistema de enfriamiento para levantarla. No use la unidad para alzar otros equipos. Después de desempacar la unidad, inspecciónela cuidadosamente para detectar cualquier daño que pueda haber ocurrido durante el envío.
  • Page 28 Manual de Instrucciones Instalación (Continuación) TUBERIAS Nunca use tuberías de plástico (PVC) con aire TAMAÑO MÍNIMO DE LAS TUBERÍAS DE comprimido. Ésto podría ocasionarle heridas LAS LÍNEAS DE AIRE COMPRIMIDO graves. Longitud de las Tuberías Cualquier tipo de tuberías o manguera que conecte al compresor deben estar diseñados para el tipo de temperaturas l/min 7,62 m...
  • Page 29: Diagrama Eléctrico

    Compresores de Tornillo Rotativo Serie CS Diagrama Eléctrico A LA FUENTE MOTOR VENTILADOR MOTOR COMPRESOR LEYENDA CONTROL DEL TRANSFORMADOR SOBRECARGA DE BOBINA SOBRECARGA DE VENTILADOR HATR RELEVADOR ALTA TEMPERATURA DEL AIRE RELEVADOR DE ALTA PRESIÓN RELEVADOR DEL TEMPORIZADOR INTERRUPTOR DE PRESIÓN DEL TANQUE CONTACTO PRINCIPAL INTERRUPTOR DE ALTA PRESIÓN ENCENDIDO...
  • Page 30 (número de parte GS903800AV - contenedor de 1 galón). La protección de la ramificación del circuito debe realizarse Disponible en Campbell Hausfeld. Llame al departamento de como se especifica en el capítulo 2 del Código Eléctrico Nacional asistencia al consumidor al 1-855-504-5678.
  • Page 31 Compresores de Tornillo Rotativo Serie CS Instalación (Continuación) Como resultado de esto, puede haber una fuga de aceite cuando NIVEL DE ACEITE se retira el tapón con el nivel al máximo. Si esto sucede, coloque Desconecte el cordón eléctrico, de nuevo el tapón de inmediato y con cuidado limpie el aceite amárrelo y aléjelo del tomacorrientes, después libere toda la presión del tanque que se haya derramado.
  • Page 32 Manual de Instrucciones Instalación (Continuación) 3. Es preciso verificar la dirección de la rotación. La operación INFORMACIÓN PARA EL FUNCIONAMIENTO INICIAL de unidad de compresión por más de 2 segundos en la LEA Y COMPRENDA TODOS LOS PASO S PRESENTADOS A CONTINUACIÓN ANTES DE dirección equivocada destruirá...
  • Page 33: Funcionamiento

    Compresores de Tornillo Rotativo Serie CS Funcionamiento 4. Permita que el compresor funcione por aproximadamente 5 VERIFICACIÓN DEL FUNCIONAMIENTO INICIAL minutos. Apáguelo mediante el interruptor de ON/OFF. Deje IMPORTANTE: Verifique el sentido de rotación del motor antes que el compresor repose cuando menos 1 minuto mientras de operar el compresor.
  • Page 34: Mantenimiento

    Manual de Instrucciones Funcionamiento (Continuación) NOTA: Todas las bombas de compresión lubricadas descargan PROTECCIONES un poco de agua y aceite junto con el aire comprimido. Instale La protección de la banda debe los equipos y controles apropiados para la eliminación de agua o permanecer instalada en la unidad.
  • Page 35 Compresores de Tornillo Rotativo Serie CS Mantenimiento (Continuación) 2. Despresurice el sistema por completo. CAMBIO DE ACEITE ¡RIESGO DE LESIÓN! La unidad consta de dos 3. Retire el filtro del aceite con una herramienta adecuada; por componentes presurizados. No intente realizar ejemplo, con una llave de correa para filtros.
  • Page 36 Manual de Instrucciones Mantenimiento (Continuación) Elimine el aceite usado, el depósito de éste el aceite y los paños de acuerdo con los Tuerca de mariposa reglamentos locales. 3. Lubrique el sello del nuevo elemento separador de aire- Cubierta del filtro aceite con aceite del mismo tipo, como el del módulo compacto del compresor de tornillo.
  • Page 37 Compresores de Tornillo Rotativo Serie CS Mantenimiento (Continuación) COMPONENTES Cada mes, desconecte todo el suministro de energía y limpie la unidad de compresión, motor, aspas del ventilador, las líneas de aire, el enfriador del aceite y el tanque. BANDAS Aísle y etiquete la corriente eléctrica, luego libere toda la presión del tanque para prevenir cualquier movimiento inesperado de la unidad.
  • Page 38: Guía De Resolución De Problemas

    Manual de Instrucciones Guía de Resolución de Problemas PROBLEMA CAUSA SOLUCIÓN La unidad no arranca - Corriente insuficiente para el La fuente de suministro eléctrico para el compresor es de un voltaje el motor no hacer ruido compresor incorrecto o de un tamaño de cable inadecuado para la carga, la caja de fusibles o la caja de los disyuntores no es la adecuada para los requerimientos de carga del compresor.
  • Page 39 Compresores de Tornillo Rotativo Serie CS Registro de Servicio REPUESTOS REQUERIDOS FECHA MAINTENIMIENTO EFECTUADO...
  • Page 40: Garantía Limitada

    B. Partes y líquidos de mantenimiento y servicio: el compresor de la serie CS deberá recibir mantenimiento y servicio de acuerdo con el manual de operación. Deben utilizarse partes y líquidos originales Campbell Hausfeld; de lo contrario la Garantía Extendida quedará inválida. Es preciso conservar las pruebas de compra de partes de servicio y líquidos originales durante toda la duración del periodo de la garantía extendida.

This manual is also suitable for:

Cs2203Cs2153Cs2204Cs2154Cs2252Cs2253 ... Show all

Table of Contents