Overview Of Stored Function Setting Data - JRC JMA-5206 Instruction Manual

3.11.4 Overview of Stored Function Setting Data

The overview of stored function setting data is as follows:
• Factory-set data: Stored data that general operation cannot change
• Default data: Standard data of each function mode that users can change
• Data that can be called: Stored data that can be called by pressing the [FUNC] key
Function Setting
Factory-set data
COAST
DEEPSEA
FISHNET
STORM
CALM
RAIN
BIRD
LONG
BUOY
USER1
USER2
[Page 1] [1] Call Mode
• Calls the standard setting of the mode, and stores it for the function number.
[Page 1] [6] Save Present State
• The currently operating state can be stored for the function number.
• Use this function to store the state of good setting that will be frequently used.
[Page 5] [7] Save Default of Mode
• Stores the setting of the current function number, as the default setting of the mode.
[Page 5] [8] Initialization
• Changes the memory contents of the mode, which is used with the current function number, back to
the factory setting.
Function Setting
Default data
COAST
DEEPSEA
[5]-[8]
FISHNET
STORM
CALM
RAIN
BIRD
LONG
BUOY
USER1
USER2
Function Setting
Data that can be called
FUNC1
FUNC2
[1]-[1]
FUNC3
FUNC4
[5]-[7]
3─129
Current data
PRESENT
[FUNC]
[1]-[7]