Monitor; Gamma; Lsc - Honeywell HD251(X) Configuration Manual

28 | HD251(X)/HD262(X)/HB273(X) Camera Configuration Guide

Monitor

The Monitor setting is used to specify the type of monitor you are using, and adjust the
video signal so it can be optimally displayed on that monitor.
1. Select MONITOR in the ADJUST menu by using the Up and Down OSD controls.
2. Change the MONITOR selection by using the Left and Right OSD controls (see
Figure 31). Monitor options are:
• LCD: Select this option when you are using an LCD monitor with the camera.
• CRT: Select this option when you are using an CRT monitor with the camera.

Gamma

Use the Gamma setting to adjust the gamma correction value. Gamma can be adjusted
from between 0.20 and 1.00.

LSC

The LSC function is used for compensating the brightness differences of the center of the
lens and its peripheries. When set to ON, LSC can be adjusted from 0 to 30.
1. Select LSC in the ADJUST menu by using the Up and Down OSD controls.
2. Change the LSC selection by using the Left and Right OSD controls.
3. Set LSC to ON and press SET to open the LSC menu (see
4. Change the LSC set level, as needed, from 0 to 30.
5. Select RETURN and press SET.
Figure 32
ADJUST
SHARPNESS
MONITOR
GAMMA

LSC
LANGUAGE
COMMUNICATION OFF
DEFECT

RETURN
www.honeywellvideo.com
ADJUST Menu - LSC Submenu Selection

15
LCD
0.55
ON
ENGLISH

AUTO
Figure
LSC

SET LEVEL

RETURN
32).

10