Adjusting The Camera Title Position; Adjust - Honeywell HD251(X) Configuration Manual

7. Select RETURN by using the Up/Down/Left/Right OSD controls to return to
SPECIAL menu.

Adjusting the Camera Title Position

The position where the Camera Title is displayed onscreen can by adjusted:
1. Navigate to the Camera Title screen (see
2. Move the cursor to POS and press SET.
The created camera title is displayed on the video image (see
Figure 22
Camera title default position
3. Select a new position for the camera title by using the four directional buttons.
Press SET to confirm the position.

Adjust

See Adjust Submenu on page 27
replaced by the next character that you input (as described above).
Continue to move the cursor and input new characters, as needed,
until the camera title is corrected.
CAMERA TITLE Position
for more information on the options in this menu.
Configuring the Camera | 21
Camera Title on page
Camera title positioned by user
20).
Figure 22).
800-12004V2 - A - 01/2013