Precautions For Use; Operating Conditions - Honeywell HD251(X) Configuration Manual

8 | HD251(X)/HD262(X)/HB273(X) Camera Configuration Guide
11. REPLACEMENT PARTS - When replacement parts are required, be sure the
service technician has used replacement parts specified by the manufacturer or
have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock or other hazards.

Precautions for Use

• Read and keep these instructions.
• This camera should be installed by qualified personnel only.
• There are no user serviceable parts inside. Do not disassemble this camera other
than to make initial adjustments.
• Do not touch the camera lens, dome or bezel (front glass plate).
• Do not drop the camera or subject it to physical shock.
• Do not use a strong or abrasive detergent when cleaning the camera.
• Use a UL approved regulated 12 V DC/24 V AC power supply.
• Use an appropriate low voltage power cable to prevent fire or electrical shock.
• Please ensure that your installation area can support the weight of the camera.

Operating Conditions

• Avoid aiming the camera towards an extreme light source (for example, light
fixtures) to prevent damaging the CCD.
• Do not view direct sunlight with the camera.
• The HD262(X) camera is rated for indoor operation; do not expose the HD262(X)
camera to rain or moisture. The HB273(X) and HD251(X) cameras are IP66 rated
and suitable for outdoor operation.
• Avoid operating or storing the unit in the following locations:
• Extremely humid, dusty, hot/cold environments; extreme temperature
conditions where the operating temperature is outside the recommended
range of 14°F to 122°F (-10°C to +50°C). Be especially careful to provide
ventilation when operating under high temperatures.
• Close to sources of powerful radio or TV transmitters.
• Near a cooling or heating device.
• Close to fluorescent lamps or objects reflecting light.
• Under unstable light sources (may cause flickering).
www.honeywellvideo.com