MANUAL
Used for fine White Balance adjustment. Set White Balance first using ATW or
AWC then change to MANUAL and press SET. Increase or decrease the value of M-WR
(Red) and M-WB (Blue) while monitoring the color of the image (see
is best suited for scenes with lighting at a constant color temperature (indoor with
consistent lighting at set temperature).
Figure 6
D-WDR/HSBLC
This camera uses 3D-DNR, which provides intelligent light level control to overcome even
strong backlight conditions.
1.
Move the arrow indicator to D-WDR/HSBLC on the SETUP menu screen using the
Up and Down OSD controls (see
Figure 7
2.
Select the desired mode (see the following sections) by using the Left or Right OSD
controls.
OFF
BLC function does not operate.
BLC LEVEL
Select level from LOW/MID/HIGH.
The BLC ZONE can be set to the desired area by changing the TOP/BOTTOM/LEFT/RIGHT
values (see
Figure
8).
MANUAL White Balance Menu
WB MANUAL
M-WR
M-WB
RETURN
MAIN SETUP Menu - D-WDR/HSBLC Selected
MAIN SETUP
LENS
EXPOSURE
WHITE BAL
D-WDR/HSBLC
HD-DNR
DAY/NIGHT
SMART-IR
SPECIAL
EXIT
64
64
Figure
7).
DC
ATW
OFF
AUTO
COLOR
OFF
Configuring the Camera | 13
Figure
6). This mode
800-12004V2 - A - 01/2013