Signaling Settings
The signalling settings are also available as parameters in the configuration file. See
"network" Module: Network Settings on page 71.
After entering information on this page, click
Voice
Click the link for each setting to see the matching configuration file parameter in
Appendix A: Configuration File Settings. Default values and ranges are listed there.
Setting
Min Local RTP port
Max Local RTP port
NAT Traversal
The NAT Traversal settings are communicated to the VoIP server so that the base
station is reachable when connected to the Internet behind NAT.
Setting
Enable IP Masquerading
Public IP address
VSP600/VSP601 Administrator and Provisioning Manual
Description
Enter the lower limit of the Real-time Transport Protocol
(RTP) port range. RTP ports specify the minimum and
maximum port values that the base station will use for RTP
packets.
Enter the upper limit of the RTP port range.
Description
Select to enable NAT traversal and IP masquerading.
Enter the external IP address of your router. This setting
identifies the router's public address to the VoIP server.
25
to save it.
WebUI: System