Saving Your Settings - VTech VSP600 Administrator And Provisioning Manual

3. On your computer, open an Internet browser. (Depending on your browser, some
of the pages presented here may look different and have different controls.
Ensure that you are running the latest update of your preferred browser.)
4. Type the IP address in the browser address bar and press ENTER on your
computer keyboard.
The browser displays a window asking for your user name and password.
5. For the user name, enter admin. For the password, enter the default password,
admin. You can change the password later on the Servicing > Security page.
6. Click OK.
The WebUI appears.
Click topics from the navigation bar along the top of the WebUI, and then click links
to individual pages along the left. You view and change settings in two different
types of fields: drop-down lists and entry fields into which you type information. For
your security, the WebUI times out after 10 minutes, so if it is idle for that time, you
must log in again.
The remaining procedures in this section assume that you are already logged into
the WebUI.
NOTE: The settings tables in this section contain settings that appear in the WebUI
along with links to their equivalent settings in the configuration file template. You
can use the configuration file template to create custom configuration files.
Configuration files can be hosted on a provisioning server and used for automatically
configuring base stations. For more information, see Provisioning Using Configuration
Files on page 53.

Saving Your Settings

Each WebUI settings page has a
you have made on the page. During a configuration session, click
move on to the next WebUI page.
VSP600/VSP601 Administrator and Provisioning Manual
button. Click
10
to save any changes
before you
Using the WebUI