Asus MAXIMUS VII GENE User Manual page 52

Q-Code table
Code Description
D2 PCH initialization error
Some of the Architectural Protocols are not available
D3
PCI resource allocation error. Out of Resources
D4
No Space for Legacy Option ROM
D5
No Console Output Devices are found
D6
No Console Input Devices are found
D7
Invalid password
D8
D9 Error loading Boot Option (LoadImage returned error)
Boot Option is failed (StartImage returned error)
DA
Flash update is failed
DB
Reset protocol is not available
DC
ACPI/ASL Checkpoints
Code Description
0x01 System is entering S1 sleep state
0x02 System is entering S2 sleep state
System is entering S3 sleep state
0x03
System is entering S4 sleep state
0x04
System is entering S5 sleep state
0x05
System is waking up from the S1 sleep state
0x10
System is waking up from the S2 sleep state
0x20
0x30 System is waking up from the S3 sleep state
System is waking up from the S4 sleep state
0x40
System has transitioned into ACPI mode. Interrupt controller is in PIC mode.
0xAC
System has transitioned into ACPI mode. Interrupt controller is in APIC mode.
0xAA
1-38
Chapter 1: Product introduction