Asus MAXIMUS VII GENE User Manual page 108

CPU Power Phase Control [Auto]
This item allows you to set the power phase control of the CPU.
[Auto]
[Standard]
[Optimized]
[Extreme]
[Power Phase
Response]
DO NOT remove the thermal module when setting this item to [Extreme] and [Manual
Adjustment]. The thermal conditions should be monitored.
•
•
CPU Power Duty Control [T.Probe]
DIGI + VRM Duty Control adjusts the current of every VRM phase and the thermal
conditions of every phase component.
[T. Probe]
[Extreme]
DO NOT remove the thermal module. The thermal conditions should be monitored.
CPU Current Capability [Auto]
This item provides a total power range for CPU overclocking. A higher value setting
provides higher power consumption delivery and extends the overclocking frequency
range simultaneously.
Configuration options: [Auto] [100%] [110%] [120%] [130%] [140%]
Choose a higher value when overclocking or under a high CPU loading for extra power
support.
3-22
Set the phase control on its default setting.
Set the phase control based on the CPU command.
Set the ASUS optimized phase tuning profile.
Set the full phase mode
Set manually to a faster phase response to increase system
performance or to slower phase response to increase DRAM power
efficiency.
The item VRM Spread Spectrum disappears when you set the CPU Power Phase
Control to [Extreme].
The following item appears only when you set the CPU Power Phase Control to
[Power Phase Response].
Power Phase Response [Fast]
This item allows you to set a response for the CPU power phase response.
The reaction time will take longer when the regular mode is selected.
Configuration options: [Ultra Fast] [Fast] [Medium] [Regular]
Select to set the VRM thermal balance mode.
Select to set the VRM current balance mode.
Chapter 3: BIOS setup