Polaroid 100 Series Repair Manual page 54

-
") UsC' me-th.mol to loosen the bond between
-
the front kns element and rear lens element.
Place the lens mount in lens nest
11
11394 and
using tool 11169446, separate the two lens
elements (Figure 5-54). CAUTION: DO
NOT DAMAGE THE SCREW THREADS.
Mod<!ls 10J. 135.230,330, 3JS
&;
340:
J.
Disassemble the front shutter housing from
the shutter assembly. (Refer to procedure:
"Shutter Housing Replacement".)
-
2. RemO'l'e the fmnt lens assemb)y from the
camera using tool #169446, Position the
tool in the lens mount and squeeze the
handle until the head is fmnly against the
mount (Figure SwJS). Rotate the handle
counterclockwise until the lens lIssembly is
free of the lens retainer.
3. Use methanol to loosen the bond between
-
the front lens element and rear lens element.
Place the lens mount in lens nest' I
J
394 and
using toof
1169446.
separate tile Jenses.
Avoid damaging the screw threads on the
lens. Salle the lens retainer for reuse.
-
FIG. 5.16 REMOVING LENS RETAINER
LENS
ASSEMBt..y
-
-
-
-
-
-
RETAINER
-
FIG. 5.15 REMOVING THE FRONT LENS - PLASTIC SHUTTER HOUSING
47