Using Epsonnet Config - Epson DS-560 Network Manual

DS-560 Network Guide

Using EpsonNet Config

You can use EpsonNet Config to connect the product to a Wi-Fi network using infrastructure mode.
Connect the product to your computer using a direct Wi-Fi connection to register the infrastructure network settings
on the scanner. Next, reboot the scanner in infrastructure connection mode to connect it to your infrastructure
network.
Note:
If you are using iOS or Android devices, you can use Epson DocumentScan to connect the product using infrastructure mode.
See the following section for more information on Epson DocumentScan.
"Smartphone or tablet" on page 7
&
Check the following settings before you start.
❏ EpsonNet Config is installed on your computer.
If it is not installed, install it from the software disc or download it from the following web site.
http://support.epson.net/setupnavi/
❏ The product and your computer are turned on and connected with a direct Wi-Fi connection.
"Direct Wi-Fi Connection" on page 16
&
A
Start EpsonNet Config on your computer.
Windows 8.1/Windows 8:
Start screen > Apps > EpsonNet > EpsonNet Config
Windows 7/Windows Vista/Windows XP:
Start > All Programs or Programs > EpsonNet > EpsonNet Config VX* > EpsonNet Config
Mac OS X:
Select Applications > Epson Software > EpsonNet > EpsonNet Config VX* > EpsonNet Config.
* Where "X" is the software version.
Using Product via Network
12