a)
Advantages of the "Direct Spray" function
The "direct spray" function with a spraying system in the middle of the drum offers a
high performance of washing and rinsing to the user with a low consumption of water
and energy.
"Direct Spray" principle:
-
-
-
b)
Principle
The circulation pump brings the wash water from the drum to the left bearing, then
this water is injected through the holes in the drum (2).
HV844-N 12.01 R.B.
During the filling the circulation pump function permits to moisten quickly the
washing and thus to optimize the amount of water following the quantity and
kind of washing.
During the washing cycle the circulation of washing water permits a continuous
spraying. This operation combined with the mechanical effect of the drum
rotation permits to obtain a very high performance of wash.
The circulation with foam control will also be used during the rinsing cycles to
optimize the water consumption.
1
-
"direct spray" inlet connecting
piece
2
-
injection hole in the drum
3
-
tub
4
-
bearing
5
-
deflecteur
- 6 -
599 51 30 44 EN