Demo Program - AEG Electrolux EMW2000 Service Manual

Demo-Program
Activate the demo - program
1
2
3
4
A demo program can be started only if both the user interface and the main electronics
are equipped with updated software.
1. Access to demo program
- Switch off the appliance.
-
Hold buttons 1 and 2 pressed simultaneously and turn the program selector by one
position to the left.
- Keep both selected keys pressed for about 2 seconds.
- You can select the individual programs and the associated option keys by using the
program selector switch.
The key start/pause is disabled.
- The demo program will remain in the memory even if the appliance is switched Off.
2. Adandoning the demo program
- Switch off the appliance.
-
Hold buttons 1 and 2 pressed simultaneously and turn the program selector by one
position to the left.
- Keep both selected keys pressed for about 2 seconds.
- Switch Off the appliance to deactivate the demo program.
TSE-N 01.03 A.B.
5
user interface
main electronic
6
7
Software UAA00201
Software W2C01352
- 30 -
599 50 75 69 EN