2)
Side panel
1
-
Unscrew the 3 rear fixation screws.
Warning: Do not forget the two washers when assembling. They confirm the earth
connection of the side panels.
2
-
Pull the side panel to the back in order to disassemble the upper anchoring and the
three points of front anchoring.
3
-
Then remove the side panel.
3)
Front panel
Warning: For easier handling it is necessary to put a block under the motor.
Remove the right and left side panel.
HV844-N 12.01 R.B.
1
-
2
-
3
-
4
-
- 15 -
Unscrew the two lower side
fixation screws.
Unscrew the two lower
fixation screws.
Unscrew the two upper side
fixation screws.
Remove the front panel.
599 51 30 44 EN