Display Assembly - HP ENVY x360 Convertible PC Maintenance And Service Manual

Display assembly

Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the top cover (see
5. Disconnect the battery.
To remove the display assembly:
1. Disconnect the left display panel cable (1) from the system board.
2. Disconnect the antenna cables (2) from the WLAN module.
3. Disconnect the right display panel cable (3) from the system board.
Top cover on page 28).
Component replacement procedures 53