Battery - HP ENVY x360 Convertible PC Maintenance And Service Manual

Battery

NOTE: You do not have to remove the battery to remove most computer components. Be sure to
disconnect the battery cable from the system board before removing any components.
Description
3-cell, 43-Wh, 2.83-Ah, Li-ion battery
Before removing the battery, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the top cover (see
5. Disconnect the battery.
Remove the battery:
WARNING!
replacement battery provided by HP, or a compatible battery purchased from HP.
1. Remove the three Phillips PM2.5×4.0 screws (1) that secure the battery to the computer.
Top cover on page
To reduce potential safety issues, use only the battery provided with the computer, a
28).
Component replacement procedures
Spare part number
761230-005
31