Remote Control Function; Remote Control Setting - Icom IC-FR3000 Series Sales Handbook

3-6
3-6-1
Phone Line to Repeater Connection Phone Line to Repeater Connection Phone Line to Repeater Connection Phone Line to Repeater Connection
Phone Line to Repeater Connection for Remote Control Function Phone Line to Repeater Connection for Remote Control Function
Phone Line to Repeater Connection for Remote Control Function Phone Line to Repeater Connection for Remote Control Function

1 1 1 1 - - - - 1 REMOTE CONTROL SETTING

1 REMOTE CONTROL SETTING
1 REMOTE CONTROL SETTING 1 REMOTE CONTROL SETTING
System control System control System control System control
To enable remote control functions, the DTMF settings (RX System Code, TX System Code, DTMF Setting, TX Code
CH (Autodial), etc.) must be pre-programmed using CS-FR3000 cloning software. Use CS-FR3000 help screens for
description of functions and operation and for programming details.
▒ NOTE NOTE: Check the "Control" check-box to enable remote control operation using DTMF signals
NOTE NOTE
▒ NOTE: NOTE: Check the "TEL Function" check-box to enable remote control operation using DTMF signals from the NOTE: NOTE:
▒ telephone line.

Remote Control Function

Remote Control Setting
IC-FR4000
Public Telephone Line
34