Cloning Software Cs-Fr3000; Basic Setup Of Cloning Software - Icom IC-FR3000 Series Sales Handbook

Hide thumbs Also See for IC-FR3000 Series:

Service manual (136 pages)

Instruction manual (24 pages)

Remote control manual (14 pages)

Table Of Contents

Table of Contents

3-2

3-2-1

Getting started

o This cloning software is designed to perform data

setting and cloning for the IC-FR3000/IC-FR4000

series VHF/UHF FM REPEATERS.

o HELP WINDOW: CS-FR3000 has a help window to

describe functions and operation.

System requirements

To use this program, the following hardware and

software are required:

• Microsoft

Windows

98/98SE/Me/2000/XP is

installed

• With RS-232C serial port (D-sub 9-pin) port

Other item

Optional OPC-478 CLONING CABLE and OPC-592

ADAPTOR CABLE

Software installation

1. Quit all applications when Windows is running.

2. Insert the CD into the appropriate CD drive.

3. Double-click the "Setup.exe" contained in the CD.

4. The "Welcome to the InstallShield Wizard for CS-

F5060" will appear as below. Click [Next>].

5. The "User Information" will appear as below, then

type your name, your company name and the

product ID number with the following manner. Then

click [Next >].

• ID number: 244301-(6 digit serial number)

• e.g. the serial number on the CD is 001001, enter

"244301-001001" as the ID number.

Note 1: Icom distributes cloning software by CD or license. Depending on this, some information here may not apply as

written, e.g. ID number.

Note 2: Please see other documents provided by Icom regarding to Microsoft