h
Route the cable using the new path, and secure it with a cable tie (A).
ACM assembly removal
1
Remove the left cover. See
2
Remove the main drive gearbox. See
3
Remove the rear door and cover. See
4
Remove the power supply. See
5
Remove the power supply shield. See
6
Remove the duplex. See
7
Use a small flat-head screwdriver to block the roller (A) and prevent the shaft from rotating.
"Left cover removal" on page
"Main drive gearbox removal" on page
"Rear door and cover removal" on page
"Power supply removal" on page
"Power supply shield removal" on page
"Duplex removal" on page
Repair information
161.
208.
210.
219
A
162.
224.
209.
4514