Importing .Hmk Files Created By Another Mcp-2A - Kenwood TM-255A Product Manual

9 MCP-2A Memory Control Program (for use with TM-V71A/E, TM-D710A/E, RC-D710)
Software Name and
Extension
MCP-G707 (*.707)
MCP-V7 (*.v7)
MCP-G71 (*.71)
Note:
MCP-2A is unable to read memory channels that cannot be received by using TM-V71A/E and TM-D710A/E.
With MCP-2A, it is not possible to exchange data between above-mentioned transceivers except TM-V71A/E or TM-D710A/E.
MCP-2A cannot read DTMF memory and menu settings, etc. from the above-mentioned transceivers except TM-V71A/E
or TM-D710A/E.
For TM-V71A/E, due to its display with six columns of 13 digits, there are times when some characters used in a memory
name cannot be read depending on how the data was originally produced. For TM-D710A/E, due to its dot matrix display
with eight columns, a memory name will appear the same as the original.
Although you may be able to import an MCP file that is not explained in the above tables, some data in the file may not be
read into the MCP-2A program.

9.4 Importing .hmk Files Created by Another MCP-2A

To exchange a file with MCP-2A where the market code does not agree, file exchange is possible
via the .hmk file type. It is possible to import this file with MCP-2A. To output MCP-2A channel
data as a file that can be exchanged with another MCP-2A, export .hmk files by selecting "Export"
> "HMK File" from the File pulldown menu.
On the other hand, to import a .hmk file, import it by selecting "Import" > "HMK File" from the File
pulldown menu.
Note: By starting the MCP-2A software multiple times, it is possible to copy and paste memory channel data between
MCP-2A open windows.
TM-D710A/E
Table 9-3 MCP-2A Importable File Formats Table (K-type only)
Transceiver
Model
Only for U.S.A. and Canada models.
TM-G707A Unable to use other than K-type (U.S.A. and Canada) of TM-G707 due to
command specification differences. DTSS is ignored.
Only for U.S.A. and Canada models.
TM-V7A Unable to use other than K-type (U.S.A. and Canada) of TM-V7 due to
command specification differences. DTSS is ignored.
Only for U.S.A. and Canada models.
TH-G71A Unable to use other than K-type (U.S.A. and Canada) of TH-G71 due to
command specification differences.
Remarks
73
CONTENTS