Configuring Echolink Software For A Link Station - Kenwood TM-255A Product Manual

8 EchoLink

8.5.2 Configuring EchoLink Software for a Link Station

If your computer is already configured for use in Single User mode of EchoLink, you can easily set
up a link station. Select "Setup..." from the Tools pulldown menu to open the System Setup
window.
Figure 8-27 System Setup Window
In the My Station tab, change the configuration in the Mode frame from "Single-User" to "Sysop".
That is, select the Sysop radio button. Click the "Change Callsign" button.
Figure 8-28 Callsign Change Confirmation
A confirmation message appears that asks you to confirm that you want to change callsign.
Click the "Yes" button.
TM-D710A/E 57
CONTENTS